Façade scan for a cladding panel manufacturer

A façade panel manufacturer needed the true geometry of an existing façade before fabrication. When a façade doesn't match its drawings, panels made to the drawings arrive on site and don't fit: delays, extra cost and rework.

WhatsApp us See the result

Real Dervoss work

Dervoss · Dubai

Dervoss laser scanner set up on a rooftop above a villa community

Panels made to the scanned geometry · no on-site adjustments

01 — The project

The approach

Dervoss scanned the façade in high detail, delivered a clean, structured point cloud and built an as-built 3D model from the real site conditions, giving the manufacturer reliable geometry for design verification and fabrication.

The outcome

The manufacturer fabricated to verified façade dimensions instead of assumptions. The panels were fabricated accurately the first time, with no adjustments on site.

Client not named · images are Dervoss's own

02 — The work

From site to deliverable

Dervoss surveyor operating the Trimble scanner on site

Close-up of the Trimble laser scanner on site

Point cloud of the façade elevation showing walls and openings

Textured mesh of the scanned building exterior

As-built 3D model of the façade built from the scan

3D Laser Scanning →Deviation & Flatness Reports →All projects →

Façade scan for a cladding panel manufacturer

From site to deliverable

Send the site details. The quote comes back the same day.